Guest Guest Posted April 14, 2008 Report Share Posted April 14, 2008 Dart Iron Eagle angle plug heads for a Small Block Chevrolet 215cc Runners, 64cc chambers. Never been ported, only a .005 resurfacing. These heads are fresh I never used them after upgrading they just sat around because I changed my set up. The guides have been replaced, along with a three angle valve job. The parts that where used are Manley Severe Duty .100 longer stainless steel swirl polished under cut valves. 2.05 intakes and 1.60 exhaust. Comp Cams, Comploy Double Valve Springs 1.540 od, Comp Titanium retainers with 10 degree locks. Spring pressures and heights where also set to match the roller cam that I planned on using. Comp guide plates with 7/16 screw in studs. I have the reciept showing the pricing of parts and labor for the work done. Plus a bonus, set of roller rockers 1.5 ex and 1.6 int., Moroso Stud Girdle, and a pair of Morso Valve covers. $1300.00 Firm, I have alot more invested in these. (607)760-7243 Between 7am and 9pm Please leave your name and number with a short message and I'll get back with you. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.